Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Richmond?
Spring repair in Richmond typically costs $180-$340 for a single spring, and that’s the range most homeowners here end up paying. A matched pair, which is what usually gets replaced on a double-door setup, runs about twice that. Those are typical estimates for the Richmond market in 2026; your written estimate sets the final price. Call (866) 353-3562 for a free estimate – we answer 24/7.
Let’s be straight about why the range is wide. A torsion spring on a standard single-car door and a heavy-duty extension spring on a wide two-car Clopay or Amarr door are different jobs with different parts. What you drive away with at the end is a door that opens and closes the way it’s supposed to, done by technicians who’ve spent up to 14 years working on exactly this component. Garage doors only. No plumbing, no HVAC – just doors.
Key Takeaways
- One spring replacement in Richmond: $180-$340, typical.
- A matched pair: about double, since both springs wear at the same rate and usually get replaced together.
- Springs are the highest-risk part of the door. We handle torsion and extension work; this isn’t a job for a homeowner with a ladder.
- Same-day service is often possible. Call (866) 353-3562. We answer 24/7. Fast dispatch from 7am to 7pm.
If you’re weighing spring work against a broader repair, our Richmond Garage Door Repair Pros page lays out the full picture of what we handle in the trade.
Spring Replacement Cost Breakdown (2026)
Here’s how the line items shake out for Richmond in 2026. Use these as planning numbers; the exact figure gets nailed down once a technician sees your door.
| Line Item | Typical Estimated Cost |
|---|---|
| Spring repair – single spring (torsion or extension) | $180-$340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (often bundled with spring work) | $130-$250 |
| Opener repair | $120-$320 |
| Opener installation | $250-$550 |
| Panel replacement | $250-$500 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| General garage door repair | $150-$600 |
| New door installation | $700-$2200 |
What pushes a spring job toward the top of the range? A torsion spring on a heavy wood or insulated steel door needs a sturdier spring than a light aluminum one, and heavier springs cost more. Cables that are frayed along with the spring add to the total. Older doors where the drum, bearing plate, or end plate has worn can turn a straightforward spring swap into a more involved repair. On the other end, a single extension spring on a basic one-car door is the simplest version of the job and usually lands near the bottom of the range.
Worth knowing: if a technician arrives and finds the door already has a mismatched spring setup or a stripped center bearing plate, the written estimate will reflect that before any work starts. We give you the number first, then you decide.
What Affects Spring Replacement Pricing in Richmond
Richmond’s housing stock is a real factor here. The Fan, Church Hill, and the Museum District are full of older homes with original wood-frame garage openings – some attached to carriage houses and converted outbuildings – and those doors are heavy. A heavy door eats springs faster and needs a higher-rated spring than a standard builder-grade door. Meanwhile, the newer subdivisions out in Short Pump, Glen Allen, and Midlothian have mostly standard two-car doors from the last couple of decades that call for a predictable matched pair.
- Spring type and count. One torsion spring versus a pair of extension springs is the single biggest swing in price. A matched pair costs about double, because both are usually replaced together – if one broke, the other is the same age and under the same tension.
- Door weight and material. A steel Clopay or Wayne Dalton door weighs less than a solid wood door of the same width. Heavier doors need heavier-duty springs, and that shows up in the parts cost.
- Whether cables or drums join the job. Springs rarely fail alone. A snapped spring can send a cable loose or leave it kinked; bundled cable repair is a common add-on at $130-$250.
- Access and clearance. A tight low-clearance garage in an older Richmond neighborhood, or one with a car parked underneath that can’t move, can mean the technician has to set up differently. It’s not a fee – just part of how the estimate gets built.
- Spring lifespan and wear. Even the best springs cycle out eventually, and Richmond doors that get opened and closed multiple times a day wear through faster than a door that’s used once a day.
- Brand and door configuration. We work on the brand you already own – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor are all familiar ground. Knowing the door and the spring spec ahead of time keeps the estimate accurate.
How to Save on Spring Replacement
First, don’t wait. A spring that’s showing a visible gap or has already snapped means the door is resting on tracks it wasn’t built to hold, and driving it up and down with a manual push or a struggling opener stresses the opener and the panels. A small spring job now beats a spring job plus a stripped opener gear or a bent panel later. Spring failures don’t wait for a convenient time, and a fix on your schedule is cheaper than a fix in a hurry.
Second, ask for the pair pricing up front if you’ve got a two-spring door. When the first spring goes, the second is the same age and the same spring cycle count. Replacing one now and the other in six months means paying for two separate visits. Most homeowners come out ahead doing the pair once.
Third, bundle what’s due. If your rollers are worn or the opener is struggling, the technician is already there – adding roller replacement at $110-$220 or opener repair at $120-$320 to the same visit usually costs less than a separate trip later. The travel and setup happen once.
Fourth, get the written estimate before anything starts. The estimate is free, and it prices the job, so there are no surprises. If you’re comparing options, our page on spring replacement walks through the whole process. And if you’re thinking about a new door entirely, new door installation at $700-$2200 gives you a sense of the other direction.
Call (866) 353-3562 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Richmond?
Spring repair in Richmond typically costs $180-$340 for one spring. A matched pair costs about twice that range, since both springs are usually replaced together. Call (866) 353-3562 for an exact quote – estimates are free.
Is it cheaper to replace one spring or both?
Replacing one spring is cheaper on the day – $180-$340 versus roughly double for a pair – but a pair is better value if your second spring is the same age. Springs wear together, and replacing one now and the other later often means paying for two separate visits. Call (866) 353-3562 and we’ll price both options in the estimate.
Can you replace a broken spring the same day?
Often yes. Same-day service is available, and spring work is a common same-visit repair. Call (866) 353-3562. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so we can tell you when a technician can get to your Richmond door.
Do I have to replace the cables too when the spring breaks?
Only if they need it. Cable repair runs $130-$250 when a frayed or kinked cable is found alongside the broken spring, and a technician will check the cables, drums, and bearing plates before finalizing the estimate. Call (866) 353-3562 for a free estimate that spells out what’s actually due.
Is it cheaper to repair or replace the whole door instead?
Repair is almost always cheaper when it’s just the spring – $180-$340 for one spring versus $700-$2200 for a new door installation. A full replacement makes more sense when the panels are rusted through, the tracks are bent beyond realignment, or the door is so old that parts are hard to source. Call (866) 353-3562 and we’ll tell you honestly which direction your door is in.
Spring failures don’t wait for a convenient time, and a door that won’t open is a security and access problem, not just an annoyance. If your spring has snapped or your door is stuck, call (866) 353-3562. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Emergency garage door service is available, and the estimate is free. We work on the brand you already own, and our technicians have up to 14 years of experience on torsion and extension spring work.
Pricing reflects the Richmond market as of 2026. Richmond Garage Door Repair Pros offers free estimates – call (866) 353-3562.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Jodi Rhodes"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Adam Kowalski"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Nathan Hayes